Installing a carpet can really be a daunting task.  First, you have to purchase one, roll out and trim up.  If you think you are done with it already, well, not really, if you still want it to last for a long time.  When carpet is installed correctly, you have to take good care for it so that it can last long before it needs replacement.  You can look for carpet cleaners gold coast, so you can achieve your desired results. 

You can also try installing your own carpet.  There are now a lot of videos and books that teach how to install a carpet, however, you need to buy some extra materials and tools for the job.  You may choose to borrow these tools and materials from the store where you are planning to purchase your carpet from.

To begin installing your carpet, the first thing you need to do is to remove the entire baseboards around the room so that you can make the installation a lot easier.  Make use of utility knife in cutting a two feet wide strips from your old carpet.  Just pull this away from the strips and then roll up the carpet as you go.  Make sure that you dispose this correctly.  Do the same with the underneath foam pad.  You may choose to let the old pad stays, but it is advisable to replace it with a new one.  If you own a pet, there will surely be some foul smell there and aside from that, this can even hold so much dust which is not exactly good for  those who have allergies.

If you know how to install a carpet, you will learn how to get rid of the tackless strips and clean the floor thoroughly.  When it is already dry, examine the subfloor and see if it is still in good condition.  Make sure that it still does not require floorboard replacement.  If all is well, you can already place the latest tackless strips.  Install them ½” from your wall and all around the place except for the doorways.  Use the staple to place the carpet pad firmly inside tackless strips.  Just lay the carpet up next to one another.

The next thing to do is to cut and place the carpet on the floor.  Measure it properly and cut it out overlapping about 6”.  If there is a need to place some extra carpeting strip to accommodate a bigger room, then just do the similar procedure with an extra piece, however you have to make sure that the nap goes the same way on both pieces.  When you try to lay the next piece, try to overlap the previous piece by extra more inches.  Cut both the carpet pieces evenly and make sure the seams all match up together.  Seal these pieces together  with a seaming iron and a seaming tape, which you can borrow from the store as well.  This really an important skill that you have to learn when you do not want to rely on carpet cleaners gold coast.

Some other tools that you also have to rent or borrow are the carpet stretcher and a knee kicker.  After cutting the carpet to make it fit the strips, you can make use of the knee kicker in stretching out the carpet on the tackless strips.  To make the kicker work, swing our knee right into the padded butt.  Next, you have to ensure that the carpet is free from any lumps by using the carpet stretcher.  When you think that the carpet is all stretched out after using all of these tools, make the final trim.  You can now re-install your door edge strips and moldings.

This is one task that you have to do in one whole day, in order to make it right.  After you bought or rented the tools, material and equipment, it is sometimes better to get a professional company who can help you install your carpet properly to save you time, money and effort.

Share →

Leave a Reply

Your email address will not be published. Required fields are marked *

"We Are So Socially Cool"

" Happy Bob Our Company Mascot "

Looking for something?

Use the form below to search the site:


Still not finding what you're looking for? Drop us a note so we can take care of it!